Expert Answers about Mazda MX-5 Miata

• Tail Light Converter Between Class C With Combined Lights And A 2006 Mazda MX5 With Separate Lights
• Sounds like you are on the right track here Ronald and we do have a product that fits this category. What you will need is the Curt 2 to 3 Wire Tail Light Converter # C56196. This converter will let you connect your 2006 Mazda MX5 with separate or 3-wire system and allow it to receive signals from the combined or 2-wire system on your Class C. We do recommend installing diodes with this converter in order to prevent any back feeding. You will need to install diodes # RM-690 between the...
  view full answer...


• Can SeaSucker Roof Rack Bars For Mazda Miata Hardtop be Close Together
• Hi Gerhard, You can put the crossbars close together on your Mazda Miata when using the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. That said, the correct distance apart is going to depend on the carrier. We don't offer a windsurf board carrier for the width you need, but carriers will have a specific distance apart required for their use. So the crossbars can be close or far, but the carrier determines the right distance, and if the board is angled upwards, yes that will create a...
  view full answer...


• Trailer Hitch Availability for 2009 Mazda MX-5 Miata with Appearance Package
• I spoke with my contact at Curt about the fitment of the Class I Receiver Hitch # C11028 on your 2009 Mazda MX-5 Miata with the Appearance Package and he said that although it does fit up to the frame, there is a significant amount of fascia trimming that needs to be done for you to have access to the hitch receiver. Normally these would be somewhere around 3" holes that would need to be cut but he said for this particular application the holes would need to be somewhere in the ballpark...
  view full answer...